Uncles 240D Conversion is underway! Dust storm ended the day early.
This morning bright and early we began doing a ‘warm weather’ dual tank conversion on my uncles 240D. The car is virtually identical my 240D I am currently selling on ebay here: 240D Ebay Link Wish me luck on this auction! :)
I say its a warm weather conversion because he lives here in the high desert of Nevada. Now it does get cold in winter. He might even get a few days of below freezing temps. But for the most part he does not have to worry about the kind of weather conditions I do in the mid-west and up north. In the southwest single tank conversions are much more common but I am of the belief that vegetable oil should never be used as a cold starting fuel. My first conversion was a single tank, and I could start it up easily on straight veggie oil even in the low-mid 40’s. Now I had to wait several minutes for the system to warm up enough to give me adequate power but it worked.
The only way to really make single tank work when it gets into colder temps (Lets define colder as mid-50’s or below) is to blend the veggie oil with normal Diesel. (Biodiesel can gel/thicken up too!) Granted unless it was ‘REALLY’ cold outside (below 20’s) a 50/50 blend in a single tank would probably suffice. But see what is happening here… Lots of IF’s and Maybes. That is not good enough for me. I want to be running on pure veggie as long as I possibly can as quickly as I possibly can with no blending. I am not trying to knock on single tank conversions. But the more and more research I do the more and more I become convinced that starting and stopping the engine on the fuels it was designed for is the only way to go. It makes the conversion obviously more complicated. But when it is done right it makes your car more reliable, better in adverse weather and could possibly increase your engine life. Don’t forget veggie oil contains all sorts of acids/compounds/fats etc etc. Not found in normal diesel. It is still unknown what kinds of effects letting that veggie oil sit cold in your engine/injection pump for days/years could have on component longevity.
Sorry for the long-winded paragraph but we are just scratching the surface here. I am not a tribologist, nor a professional diesel/injection pump mechanic. I learn new things every day so do your own research and try to draw upon a large pool of good minds.
System Overview:
We are going to use his stock fuel tank as the veggie tank and add a small 8 gallon fuel cell for diesel to start and stop the car. Fuel cell is going to go into the trunk inside a fender well. We are going to reuse the steel fuel lines under the car and extend them into the trunk essentially keeping the stock diesel system the same just moving the tank farther back. We are going to use a wrap of coolant hose around the stock tank to add a small degree of heat (for the coldest days) and use a heavily insulated Hose-on-Hose line to the stock fuel tank from the engine bay. This will serve to add heat to the veggie oil soon as it is pulled from the tank. We are using a PlantDrive Racor filter housing to pre-heat and filter the oil. A standard Ford fuel selector valve for switching between tanks. A 12v Vegtherm in line heater to add more heat to the system and a looped return on the veggie line. A control panel will be installed where the ash-tray used to be. That is basically it.
Here is the engine bay before we touched anything. Gotta love how simple it all looks, To me anyway!
Here is the insulated Hose on Hose connection that will run from the engine bay to the stock fuel tank. It will be nicely tucked away once it is installed into its final location.
Here I am using a small section of 3/8″ fuel line I cut down its length to act as a grommet to keep future fuel lines from rubbing on the bare metal. This hole will be used for the fuel lines that run to the new fuel cell in the trunk.
Many, MANY more pictures and posts to come on this project.
Tags: 12v, 240D, Advice, Conversion, Dual Tank, Injection Pump, PlantDrive, Single Tank, VegTherm, Winter